so i am making a plane, but when i pull up it starts doing backflips, how do i fix this

Tags
Question

12 Comments

  • Log in to leave a comment
  • Profile image
    10.1k GSpace

    @sentinelaerospace Ah ok

    3.8 years ago
  • Profile image

    @GSpace it was the engines, i messed up on the XML and they were ten times more powerful than anticipated

    3.8 years ago
  • Profile image
    10.1k GSpace

    Sometimes the engines are two powerful or you need to make sure the tail has no fuel in. That usually works for me

    3.8 years ago
  • Profile image

    good news, its now stable at any speed less than hypersonic

    3.8 years ago
  • Profile image
    5,241 Kuiper0

    Make sure your CoM is slightly behind and slightly above your CoM. Look at other people’s planes to learn from their style of building.

    3.8 years ago
  • Profile image

    @SoulBlazer ok, sometime early tomorrow, around 8:00 AM pacific time

    +1 3.8 years ago
  • Profile image

    Also, what @SoulBlazer said. It would be much easier if I could see what I was working with.

    +1 3.8 years ago
  • Profile image

    @sentinelaerospace edited ion engines, or regular ion engines?

    +1 3.8 years ago
  • Profile image

    @HermesEngineering ok, if it helps you i am modifing the Avalon M1 to be space capable with ion engines

    +1 3.8 years ago
  • Profile image

    Also, make sure you have vertical stabilizers. They help a lot.

    +1 3.8 years ago
  • Profile image

    I had this problem before.

    1. Try inverting your airfoils.

    2. If that doesn't work, make two control surfaces, one for pitch, one for roll, and invert the pitch control surfaces.

    3. If that doesn't work, shift the wings back and run through 1 and 2 again.

    +1 3.8 years ago
  • Profile image

    @Arstotzka no, unless i am getting the indicators mixed up, blue is lift right?

    +1 3.8 years ago

2 Upvotes

Log in in to upvote this post.