ISR350-100
This forum is made to instruct how the ISR350-100 works
HOW TO START THE ENGINES
to turn on the engines, activate AG1"Engines" and this screen will appear
type "3" to turn on the APU if it is turned off you will not be able to start the engines.
Then you repeat the process, but type "1" to start the left engine or "2" to start the right one.
In the flight log under "ENGINES", if you click on it, "Eng1,Eng2,APU" will appear at the bottom, when starting engine 1 or 2, "STARTING" will appear
And after a while "on"
In "STARTING" the engine will have no power.
ACTIVATION GROUPS
AG2 is the autopilot when activated a screen will appear:
that says the instructions. In the flight log will appear the speed (SPD), Heading(HDG), Altitude(ALT) and FT/min(VS) in a/p if you press it.
AG3, is responsible for activating the reverser and spoilers when at high speeds.
AG4lights
responsible for turning on the plane's lights except for the windows.
AG5 dumps jet fuel in minutes.
AG7 displays basic information on the screen.
SLIDERS
SLIDER 1Flaps
SLIDER 2 Trim
SLIDER BRAKE Brake and Spoilers
