This is a Sneek peek of my Upcoming Conqueror Rocket.
The Naming of Each Rocket was still not clear,but i manage
to built a Super Heavy lift Conuqeror Rocket.
Here it is:
The Image you see is Where Fuel Tanks are placed inside the Rocket Stage.
CE-1 Stands for Conqueror Engine 1
Here are the Information for now,have a Good Day Folks!
Ok. Also, why do you have ullage motors on the first stage pointing up?
Ullage motors are used to settle fuel/propellant in the bottom of the tank so that the engines would suck in fuel/propellant rather than inert gasses. They are typically on inflight-ignited stages, pointing downward, and fires before the main engines ignite for orbital insertion or adjustments. RCS could also function as ullage motors.
In your case, I think you meant stage separation motors, as 1) the fuel/propellant in your first stage is already settled down because of gravity and 2) ullage motors point backwards rather than forwards.
@Kell yeah because i think there are great features and bug fixes are comin'
@tars13 I'm going to Ensure that CE-1 Consumes more of the fuel than the oxidizer.
Cool! But in real life rockets have more lox than fuel, in two times more i think
@Kell I'm About to Upload the Entire Rocket without the Service Module,Command Module and LES.The Reason is to Slow the First Stage Down and Theres Also an Ullage motor in the Second Stage.
As the First Stage Slows Down,The Second Stage Speeds up With the Ullage Motor.The Thing you say as Separation Motors is really the Function of it.