GForce Meter

Made a gforce meter out of some shocks and vizzy. it has its faults, but it seems to work quite well.

Craft

Each spring is actually 2 in inverted directions. u joints help keep everything loose

The cube in the centers distance from the actual center is measured @ 1g and 20gs (1x and 20x mass scale)

How to use

This must be calibrated to output reasonable information.

Notes:
Be sure to use the long formated display string at the bottom of the program
The lowest dark grey fuselage piece is the root piece to the mechanism and should be used for subassemblies.

To calibrate:
Attach mechanism to your craft. 2 calibration tests must be performed:

Ensure the cube in the center of the mechanism has mass scale 1 (100%)
Launch craft and wait for things to stabilize. Record the Dist # from the output
Return to the vizzy code, and update the variable: oneG to the value you just recorded.
Repeat the above test with the cube mass scaled to 20 (2000%), record the number, and update the twentyGs variable to the value you just recorded.
save the program and craft.

Calibration is completed.

You can verify the calibration by loading your craft into flight on the runway, and once stabilized, the "Gs" value in the display should = 1.000