Soviet N - 1 Rocket 2.5

I've made some minor upgrades regarding the separation of the orbital module and booster of the Soyuz spacecraft. This ensures that after separation, they won't enter the atmosphere alongside the return capsule.

I've upgraded my N1 rocket with the following improvements:

Added a separation engine to the escape tower (Activation Group 4).
Modified some of the rocket's textures and colors to make it more beautiful.
Adjusted the layout of the RCS to make it more aesthetically pleasing and practical.
Reinforced the rover to prevent it from disintegrating during the rocket's ascent.
Removed unnecessary inter - stages.
Modified the engines of the Soyuz module.
Added a new docking port.

Functions of the activation groups:
Activation Group 1: After switching to the lunar module, the landing gear can be deployed.
Activation Group 2: After switching to the rover, the rover can be started.
Activation Group 3: After switching to the lunar module, it controls the engine on - off.
Activation Group 4: The escape tower separates (Note: This is the separation after the escape tower is activated).
Activation Group 5: No function.
Activation Group 6: The gyroscope is turned on.
Activation Group 7: Activates the escape tower (After the main engine fuel of the escape tower is exhausted, please click Activation Group 4).
Activation Group 8: Deploys the antenna and activates the docking system.
Activation Group 9: Deploys the solar panels.
Activation Group 10: Controls the RCS.

Slider 1: After switching to the lunar module, pulling it to - 100 can deploy the landing gear and antenna (It should be used in combination with Activation Group 1 and Activation Group 2).
Slider 2: After switching to the lunar module, it can lift the rover. (To secure the rover and prevent disintegration, many side separation inter - stages are used. Please first open the separation inter - stages at the bottom of the rover, including the two separation inter - stages fixing the rear wheels. After lifting the rover, please first open the two separation inter - stages of the front wheels, and then open the middle separator, and the rover will drop to the ground). After switching to the rover, Slider 1 can unfold the rover (Activation Group 2 starts the rover).

My English isn't very good, so there may be some mistakes. Please forgive me.