YOU CANNOT FLY ISS ON A ROCKET. HOW TO REACH THE ORBITAL AS FOLLOWS:
1. Launch any rocket into orbit with an altitude of A = 180 km and P = 165 km with an inclination of 40-45 degrees (you can change it to your liking)
2. after reaching orbit, click SAVE LOCATION and name it ISS ORBIT
3. then click SAVE & EXIT
4. After returning to the menu, load ISS. then CHANGE LOCATION to ISS ORBIT
5. then click PLAY, launch craft. after that you can improve the rotation, pitch, roll, yaw, and so on.
Activation group 1 = roll the white solar panel & open / close air lock
activation group 2 = roll the main solar panel
activation group 3 = roll the truss 1,2, & .....
in the air lock there are 6 seats for astronauts to visit :)
8 places for docking to the ISS
3 Astronauts in Soyuz space craft will be posted soon ... !! already adjusted to the ISS comparison. launch it and visit the ISS ....
the comparison of the size of the ISS & space craft that I made from the original is 1: 2
GENERAL INFO
- Predecessor: SimpleHeavy Rework
- Created On: Windows
- Game Version: 0.9.306.0
- Price: $37,028k
- Number of Parts: 795
- Dimensions: 18 m x 76 m x 107 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 0N
- Engines: 0
- Wet Mass: 4.54E+5kg
- Dry Mass: -829,148kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|
23 Comments
- Log in to leave a comment
-
-
-
-
-
-
-
915 Barran4.0 years ago
@Aerodyne I don't know 100% of everything in Simple Rocket 2. just a beginner and make all I can. and later maybe there will be repairs again .... don't forget, you can send Orion and Soyuz that I Post yesterday. if you want to make cargo to the ISS yourself. then the docking port size is 150%. and if you want to add the ISS section. the size is 300%.
-
-
915 Barran4.0 years ago
@Aerodyne so that the rotation does not change back. you must deactivate the rotation with the activation group. or you can also deactivate it manually. if manually switch off. even though you activate group activation. then Rotation remains off.
-
15 Aerodyne4.0 years ago
Plus when i tried with another iss replica, I put command chips on the two seprate trusses, and i switched to the command chip contolling the truss, tryied to target droo, and the whole thing rotated
-
15 Aerodyne4.0 years ago
I think the only way to get the truss to point at the sun automatically is to have the truss target Juno, which we cannot do
-
-
915 Barran4.0 years ago
@Aerodyne I don't know if using rotation can be automatic, as far as I know it can't. unless you replace the Sollar panel with the Sollar panel Array.
but i am using equatorial orbit (0 degrees). so it doesn't need left-right rotation. just need to turn the front up and vice versa.
ISS can't rotation automatic too, they set the speed at which the solar panels rotate in degrees per second. i think so.. -
-
-
915 Barran4.0 years ago
@CPSA_CPSEDA Thanks, to make it is not difficult, it just takes a long time. but it looks difficult to make
-
-
915 Barran4.0 years ago
if you want it to be easier to go to meet the ISS, then the tilt is 0 degrees (equator)
-
915 Barran4.0 years ago
@Tweedle_Aerospace i will post Soyuz versi 2 for going to ISS....try it, launch going and dock to ISS. after that i will post Delta IV Heavy with orion for test flight to ISS
-
4,796 TweedleAerospace4.0 years ago
@Barran I already have a space station. And I am working on a rocket that could carry the weight.
-
915 Barran4.0 years ago
@Tweedle_Aerospace .Launch the rocket into orbit, save location, return to the menu, load ISS, change the location to the newly saved location, then start and the ISS is ready. it is easier than flying one cargo at a time to build the ISS.
-
I do not have pro lol... Then how it load?😭😭😭🙏🏻🙏🏻🙏🏻