16 Comments
- Log in to leave a comment
-
@SomeoneGao hey I would like to have SpaceX starship. Yes this is good but the part count is too high. My iPad won’t handle 14,000 part, can you find a way to chill out the count 3000 max
-
-
-
795 SomeoneGao
@Freeskyaerospace The HSR has over 1600 parts, the engine compartment has over 2500 parts, and the bottom is made according to the engine protection system on the BN11. The first is the T-shaped shell, the second is the internal stainless steel plate, the third is 33 engines, the fourth is 13 engine protection covers, each cover has about 75 parts, and finally is black insulation material and external cylindrical protection cover. In order to synchronize the movement of the 13 engines and protective covers, each engine and protective cover is driven by two motors and can undergo a 15 degree deflection on the x-axis and y-axis. The initial HSR only had about 900 parts, but the HSR of BN11 was thrown away during flight, so I used about 700 parts to make the bottom of the HSR, as well as the upper structure of BN11's fuel tank, which includes four motors and pipelines. Because each grid fin has over 360 parts, there are nearly 1500 parts in total, and there are also many parts for the external pipe fixing device of BN11. If you delete the engine compartment at the bottom, you can see every pipe used to provide methane and lox to the engine. On SN29, the heat shields have over 900 parts, the rack used to load Starlink has about 750 parts, and each engine at the bottom is also driven by two motors. When it was first completed, there were over 15000 parts, which was already a combination after reducing the number of parts
-
-
-
-
-
-
-
795 SomeoneGao
@Bluestaf @Eddyviolin525 I have minimized the use of parts to the greatest extent possible
-
-
139 Bluestaf
it took 15 minutes to load in the editor building thing i am extremely excited for the inevitable computer crash when i try to launch this
-
-
@SomeoneGao I meant 5000 to 6000 parts