This is a version of Mars Rover Perseverance made by edrnrx and adapted by me with new tires and a rocket able to launch from Earth to Mars.
Everything was tested and worked but pay attention to some bugs because I made this craft very quickly:
- There's 3 command chips here. Take control of the rocket chip first.
- Do not launch at full throttle, the engine is so powerfull and the rover explode with too much aceleration or strong brakes but it supports high speeds in the space vacuum
- Do not active the rover while inside the rocket
- Everything is manually, it means (To activate the engines, interstates, landing legs, etc you will need to click on the item and activate it)
Do not use Stage and Activation groups. Every stage is manually if you follow these steps:
1 - Start the Big Mage Engine
2 - After out fuel, activate the interstage (colored with red color)
3 - Start the Pixie Engine
4 - Activate all 4 landing legs
5 - In the Mars surface, open the door and desconnect the docking port below the rover
6 - Carefully get off the rocket and step onto the ground
GENERAL INFO
- Predecessor: Mars rover perseverance(complete)
- Created On: Windows
- Game Version: 1.1.107.0
- Price: $40,465,888,329k
- Number of Parts: 2000
- Dimensions: 81 m x 33 m x 33 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 80.6MN
- Engines: 2
- Wet Mass: 1.24E+6kg
- Dry Mass: 1.84E+5kg
STAGES
Stage | Engines | Delta V | Thrust | Burn | Mass |
---|
6 Comments
- Log in to leave a comment
-
-
-
75 SpacemanMR
@HumanoidCreature Hello. Thanks for give a suggestion. I am not a professional modder. I did my best on this lol
And I prefered to do not add stages because of conflicts with the inside rover stages
So, I decided to make this rocket with manual stages. (The player must click on engine, interstages, doors, etc)You said that big engine doesnt work even turning on. It's because this rocket has 3 command chips
1 - Perservance, 2 - Engenuity, 3 - Rocket
And probably the default is number 1. You must "Take control" of the third command chip. After this you can able to turn on the big mage engine :) -
254 HumanoidCreature
o yea, the "big mage engine" doesnt work even when i turn it on
-
@HumanoidCreature If you don't know how to select the third command chip. Just click on Big Mage engine and "Select the command pod controlling this part"