@kBc2345 right bad stock stock and put

Jundroo:Simple Docking Poot(bushi

@3DExplorer航天器靠RCS如何绕Z轴转

@jianghaiyang 和现实的一样为0.8米的口子，得头或脚先过去

口太小了，人很难过去

用了一下，发现对接时有时候三个锁紧器会有一到两个出现滑脱，导致对接失败。请问是不是得先开了锁紧器，然后有一点先对速度再进行对接的？

nice,i like that

@rizkyman see this.

Damn, ek kan hulle nie dok nie.

@FRE 哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈

@3DExplorer Docking system is good but, Can you reupload your Dongfeng missiles that you posted probably about 2 weeks ago and deleted? Thay were good crafts.

强势输出中国文化【狗头】

@AstroAerospace Please check whether AG3 is not started.

@3DExplorer It just seems to push my craft away. I can get it to work with the craft save downloaded here but after attaching it onto the craft I have It doesn't seem to work.

@AstroAerospace Is it that the capture ring failed to dock successfully after retracting? Does it show a few percent of the docking progress?

How exactly did you get these to dock with one another? Have tried multiple times and can't seem to get it to work unless I connect them through the designer.

@Stormfrost 这个你就自己试了，实在没办法的话你可以先把捕获锁收起来，贴上去再锁上

是不是对接时需要有一定的初速度才能使卡板器和导向瓣锁死？那么具体需要多少速度，或者说，动量呢？

Very interesting, might add this onto my space shuttle (although a little changed to fit the style)

@Taokyle 至于对接后晃动，考虑到可能导致捕获锁松脱等，还是希望它更稳定一些

@Taokyle 正如我说的，我想过让软对接环上下左右移动，也认为从理论上可以使用六对互相交叉成＋形状的铰链进行控制。
然后我就在想这个功能必要性有多高，于是我观看了美国载人龙飞船对接国际空间站以及中国神舟飞船对接天和核心舱的视频，其活动并不明显，认为这个功能似乎不是很必要。
以及如果有给飞船装摄像头的话，那么摄像头看到的位置偏差其实是硬对接框以及飞船和目标的偏差，这种情况下应该也不需要用到软对接环的平移功能，最终我舍弃了该功能。

@3DExplorer 其實你可以用活塞加緩衝器組合，然後就可以達成軟接觸環的作用（因為緩衝器在一定強度可以水平移動，可以達成它的效果）

Got any tips how to make good zarya module?