Orbiter-I: Crimson White

Rocket: Orbiter-I

Payload: Multi-Purpose Satellite (ReBound MPS)

ReBound MPS features:

•Gyroscope

•Solar Panels

•RCS

•Antennas

•Cameras

•Lights

•Docking Port

Instructions:

1. Open AG panel and press AG(Launch) and wait until the fairings deploy at approximately 59000m and at this point RCS is automatically enabled.

2. Once the fairings are distanced from the 2nd stage, time warp 25x or below. Once near the apoapsis, the vizzy program will automatically set your warp back to normal and initiate a burn to gain orbit. At this point, the program is done doing all of it's tasks which means you have to manually set your orbit. Use the 2nd stage fuel and the RCS to do so.

3. Once desired orbit is achieved, you can now undock/separate from the 2nd stage by activating AG(Docking Port), distance the payload from the stage by using the RCS with the analog sticks and translation mode enabled. Activate the various functions of the satellite in the AG panel and what each one does will be listed below.

AG definitions:

AG(Launch)- Runs the VIZZY program to launch the rocket and other functions

AG(Activate AG 4-9)- Activates AGs 4-9 at once or disables them at once. Only works properly when AG(Launch) has been enabled

AG(Docking Port)- Activates/Deactivates the docking port

AG(Activate Antennas)- Enables the antennas to be extended by adjusting Slider 1

AG(Antenna Alignment 1)- Enables adjusting where the main antenna is pointing using Slider 2

AG(Antenna Alignment 2)- Enables rotating the main antenna using Slider 3

AG(Beacon Lights)- Activates/Deactivates beacon lights

AG(Docking Lights)- Turns the docking lights on or off

AG(Solar Panels)- Extends/Retracts the solar panels

AG(RCS)- Enables/Disables RCS

Enjoy playing with the MPS ReBound or the Orbiter-I itself and I'll leave it here.