Tydos Hover Station Transfer - TGNSV Nositel One - TGNSS Watchful Eye

The TGNSV Nositel One is an attempt at a heavy lift platform capable of transferring the TGNSS Watchful Eye observation platform to the upper atmosphere of Tydos. Unfortunately our simulators are unable to reliably render the stress dynamics if the mission so the flight has been scrapped and is only capable in theory until better performing simulations can be run.

Operation:

Stage 1 is 180 SRB nozzles (This is where I break up in flight @ 8km , just seemingly randomly)
Stage 2 Begins 31 Second stage nozzles, low TWR so out of atmosphere only, should be able to circularize here. recommend no throttle until after staging 3 (early versions needed this throttled up for a short while to lift off before SRB TWR >1, fixed SRB TWR but did not change staging)
Stage 3 separates the SRB
Stage 4 - 8 should escape Droo and maybe begin transfer to Tydos, with this pattern
S4 13 engines
S5 stage off empty side tanks
S6 6 engines and stage separation
S7 stage off 2 of 4 side tanks, which should drain first
S8 stage off remaining 2 of 4 side tanks
Stage 9 Tydos transfer
Stage 10 finish Tydos transfer & capture/atmospheric insertion
Stage 11 exposes the Heatshield for Tydos atmospheric entry
Stage 12 removes protective fairing
Stage 13 separates the TGNSS Watchful Eye from the heatshield

Operation of TGNSS Watchful Eye
All movements are controlled with AG and Slider 1 + axis. Can either return to 0 after turning off each AG step or just toggle after movement completes leaving Slider 1 maxed

1 Toggle all action groups on-off
2 AG 5 to level blade arms
3 AG 1 to extend arms
4 AG 2 to unpack blades rotation horizontal
5 AG 3 to unpack blades rotation vertical
6 AG 6 to enable motors and Throttle to spool up

Then reaction wheels should keep you level.