based on Xca3000
AG1:(slider1 controls forward and backward movement,roll controls steering)Normal driving mode,automatic turn signals,plus AG9 for automatic reverse lights.
AG1+AG2:Crab mode,same as AG1.(Disabling AG1 automatically disables AG2)
AG3:(slider1 2 3 4 controls the additional extension length of the support legs,with the original extension length being 1)Open support legs,extend the crane.(Enabling AG3 automatically disables AG1 and does not allow AG1 to be enabled)
AG3+AG4:(roll controls left and right rotation,pitch controls up and down movement,pitch controls the extension of the hook,slider2 controls the extension length of the crane,slider1 controls the left and right rotation of the hook)Control the crane.(Disabling AG4 does not reset,allows readjustment of support legs,disabling AG3 automatically disables AG4)
AG5:Retract the crane and automatically disable AG4,automatically disable AG5.
AG6.7.9.10:As named.
GENERAL INFO
- Predecessor: Xza3000
- Created On: Android
- Game Version: 1.3.114.0
- Price: $131,951k
- Number of Parts: 466
- Dimensions: 17 m x 5 m x 34 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 1kN
- Engines: 18
- Wet Mass: 4.83E+5kg
- Dry Mass: 4.4E+5kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|---|---|---|---|---|
| 2 | 14 | 0m/s | 0N | 0s | 4.82E+5kg |
2 Comments
- Log in to leave a comment
-
135 wybawyh3 days ago
AG1：(slider1控制前进后退，roll控制转向) 普通驾驶模式，自动转向灯，加AG9自动倒车灯。
AG1+AG2：蟹行模式，同AG1。(关闭AG1自动关闭AG2)
AG3：(slider1 2 3 4 控制支撑腿额外伸出长度，原始伸出长度为1) 打开支持腿，展开吊臂。(打开AG3自动关闭AG1并且不允许打开AG1)
AG3+AG4：(roll控制左右旋转，pitch控制上下移动，pitch控制吊钩伸长量，slider2控制吊臂伸厂量，slider1控制吊钩左右旋转) 控制吊臂。(关闭AG4不会复位，可重新调整支撑腿，关闭AG3自动关闭AG4)
AG5：回复吊臂并自动关闭AG4，自动关闭AG5。
AG6.7.9.10：如名。
Please Upvotes me！your Upvotes is very important to me！