Bravo 1 v8 1.1

Hi guys and this the Bravo 1 v8 this rocket is a rocket created by hiam0620 and the “NASA” meaning National Aerospace Space Administration. The Bravo 1 v8 1.1 is rocket that was designed under the Bravo Series. Now, the Bravo Series was actually based around the Falcon 9 and like some of you, you would say that’s the Falcon 9 but it is not. The Falcon 9 burns kerolox on the first stage and the Bravo 1 v8 burns methalox on the first stage. The operating time of the first stage is shorter than the Falcon 9.

To fly this rocket you will first need to activate AG5 and 6, then open Slider 1 and 2 and then set it to -100 on both Slider. Put the throttle on 100% and lift off! When you reach the height of 1.5 km tilt the rocket to 75, then when you reach 10 km tilt the rocket to 45 lastly when you reach 20 km tilt the rocket to 30*. Make sure you save 15& of fuel to land. After that, release the first stage from the second stage. Fly the second stage to a crash course, but make sure that the crash course will give you enough time to land the first stage, when you finished that switch back to the first stage.

To make sure everything is running nominal, the fins should be aerodynamic and not flat. Next you have to turn everything off, even though it says everything is off it is not. Turn everything on first and then turn them off, but keep AG 5,6 and Reaction Control on. Then press the Retrograde button, and just wait for the first stage to do it’s flip. After the flip close Slider 2 and Slider 1 should be set to -100. This will make the fins flat. Then wait until 16 km then turn on AG 3 and 4. AG 3 turns on 2 of the Titan engines and AG 4 will turn on the central Titan engine. When the Falcon 9/Heavy boosters land they use 3 of their Merlin Engines to stop and then turning off the 2 side engines when the booster has slowed down enough. Now, all you have to do is use the 3 engines to slow down enough and then turn off AG 3 when you have slowed down. Then the final part deploy the landing legs.

To complete the mission switch back to the second stage and deliver the payload to orbit.

AG 1- Satellite Control
AG 2 - Activates 6 outer Titan engines.
AG 3 - Activates 2 outer Titan engines.
AG 4 - Activates central Titan engine.
AG 5 and 6 - Fin Control
AG 7 - No Actions
AG 8 - Landing Legs
AG 10 - Reaction Control

This has been a fun rocket and series to make. I hope all of you enjoy flying this rocket as much as I did. Please share me one of your ideas so I can implement them onto the next generation of the Bravo Series rocket. Feel free to share my design as long as you give me a shout-out.

Thanks guys that’s all,
hiam0620