Overview

Hello and welcome back, today I am proiud to show you the Bravo 10 v5. The reason behind that we didn’t release anything in January is because I have been trying to perfect the landing starting the three RSI-RE2 engines at 8 km. The engines have also now been altered to improve performance, thurst and TWR is better, which makes the rocket much more efficent.

Bravo 10 v5 is Configured for Flight

To fly it just set the Throotle to 100%. That’s it you’ll do the landing part.

Landing Successful

Preparing for landing

Now is it time for the first stage or booster to land. All you will need to do is press the Retrograde button, turn off RCS and then turn it back on again (also switch off the Landing Gear, but don't turn it on). Lastly just turn off all the engines, by turning them on again and then turn them off.

Re-orientation Burn

Now to do this burn correctly, just set your pitch to -15º and then reignite the RSI-RE2 (AG3 & 4). Continue burning then at 12% fuel press the Prograde Circle and then keep burning until your fuel is 7%. After that just wait.

Hover-Slam

Now at 4 km turn on the same three engines (AG 4 and AG 3), if you miss the 4 km mark you are doomed to crash, so, activate the engines at 5 km if you’re not good with timing. Then turn off the two outer RSI-RE2 (AG3), and use the centre RSI-RE2 to land softly. Don’t forget to deploy the landing gear

Second Stage

Delivering the Payload

Now that everything has taken care of, it's now time to deliver the payload to orbit. Start by pitching the second stage to 5* and then let the second stage burn until you have created an orbit for the payload.

Activation Groups and Sliders:

• AG 1 - Satellite Gear
• AG 2 - 6 Outer Engine
• AG 3 - 2 Outer Engine
• AG 4 - Centre Engine
• AG 5 - Fin Retract and Extract Control
• AG6 - Fin Actuations Control
• AG 8 - Landing Gear

• AG 10 - RCS

• Throttle Slider - Rocket Throttle

• Slider 1 - Fin Control

Contact Me!!!

If you want to give me some advice or any complaints about the E Series and B Series feel free to follow me on Twitter. Click the picture.

Do you also want to support me, then considering becoming one of my Patreons. You will get behind the scenes content, a private discord server, early access to my content and more if you click the link. Click the picture

Thanks,
hiam0620

Check my other rocket designs

(Click the pic to go to that rocket)

Bravo 10 v3

Bravo 10 v2 Semi-Autonomous

Echo 3

Please always feel free to let me know if there are any suggestions or problems with any of my rockets. -hiam0620