TDRS satellite with Inertial Upper Stage

Don't forget to credit me when you feature it in a YouTube video. The Inertial Upper Stage is included because I may not post it. It was delivered by the Space Shuttle and the Inertial Upper Stage (and other rockets after passing generations). When you separate the 1st and 2nd Stage of the Inertial Upper Stage, Use the RCS and also enable analog sticks and Translational Mode and use the left and swipe it up then ignite the second stage.
Sun Sensors: Activation Group 2
Input: Slider 1
Make the blocks, hinge rotators, structural parts and rotators have a fuel line.
Solar Panels Platforms Extend: Slider 1
Activation Group: Activation Group 7
Gyroscope: Activation Group 5
Solar Panels (retractable without cap like real life): Slider 1
Activation Group: Activation Group 9
Antenna: Slider 1
Activation Group: Activation Group 9
AG10: RCS of the Inertial Upper Stage
To save the Inertial Upper Stage as a subassembly, take the interstage with the Inertial Upper Stage away from the TDRS satellite directly to the create subassembly on the top-left of the screen or computer then type Inertial Upper Stage for the name and press Okay. To save the TDRS satellite as a subassembly, remove the Inertial Upper Stage by it's interstage. Then zoom in through the satellite and move the command chip to the create subassembly area. Type TDRS satellite as the name of the subassembly then press Okay.
To save both as a subassembly, zoom in through the satellite and move it to the create subassembly area and type Inertial Upper Stage with TDRS satellite as the name then press Okay. It has 6 cameras: Staging Cameras 1, 2, 3, 4, Earth-Observing Cameras 1 and 2.
1st Picture: Both on Designer
2nd Picture: Minutes after Deployment
3rd Picture: Inertial Upper Stage first stage burning
4th Picture: Inertial Upper Stage second stage burning
5th Picture: Deployment with solar panels deployed
6th Picture: Minutes after Satellite Deployment
Adjust the hinge rotator's (shaft attached to strut) attachment from the gyroscope to the fuel tank with battery. Do the same with the other side.