There was a small mistake. When you separate one level, you must find a separator falling. The solution is to connect the connection point of that separator to other parts of the first level. But note that there are two separators there at level one, and the connection points of one separator are connected. In addition, when each classification is separated, the ignition parts of the separation group have been activated. It is noteworthy that 20% of the fuel should be retained at each stage for the separation group to be fired and separated. Thank you for your approval of my work!
GENERAL INFO
- Successors 2 craft(s) +63 bonus
- Created On: Windows
- Game Version: 0.9.205.0
- Price: $54,842k
- Number of Parts: 2342
- Dimensions: 58 m x 7 m x 7 m
PERFORMANCE
- Total Delta V: 9.7km/s
- Total Thrust: 14.7MN
- Engines: 30
- Wet Mass: 4.19E+5kg
- Dry Mass: 99,643kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|---|---|---|---|---|
| 1 | 6 | 2.0km/s | 9.7MN | 61s | 4.19E+5kg |
| 3 | 4 | 1.7km/s | 4.2MN | 44s | 1.48E+5kg |
| 4 | 4 | 357m/s | 78kN | 10.5m | 1.48E+5kg |
| 5 | 0 | 0m/s | 0N | 0s | 56,890kg |
| 6 | 1 | 1.2km/s | 440kN | 2.1m | 56,890kg |
| 8 | 4 | 1.1km/s | 78kN | 10.5m | 56,890kg |
| 10 | 4 | 1.7km/s | 78kN | 6.8m | 25,772kg |
| 11 | 1 | 1.7km/s | 20kN | 27.4m | 25,772kg |
2 Comments
8 Upvotes
Log in in to upvote this post.
very good