This post contains the entier Delta II 7000 series. Let the rocket family reunion commence!
Since my last Delta II upload, I have made some more updates in an effort to make this rocket a more faithful replica. Included in these updates are a brand new launch pad and the Delta II's 3m fairing, which can be found on some of the configurations in this post. The real meat and potatoes of this update, however, are found in the second stage.
The second stage has been given a much needed overhaul. @MarioG has graciously created a stunning replica of the AJ-10-118K upper stage engine, and his replica has been integrated into the upper stage of this rocket. Additionally, I have updated the upper stage airframe and supporting structure models.
You can download the Delta II 7925H here. This configuration sports a 7000 series first stage booster, 9 GEM-46 SRMs, an AJ-10-118K upper stage engine, and a spin table with a Thiokol Star 48B Payload Assist Module. You can download the other configurations for the Delta II 7000 series below.
Delta II 7000 Series Configurations:
Spin Table Operations:
Ensure that the main upper stage RCS is switched to "OFF". This can be done by pressing the "0" key.
Press the "8" key to swtch the spin table RCS to "ON"
Press and hold "E" for 3-4 seconds.
Press the Spacebar to ignite the Star 48B.
Release the "E" key.
Thanks again to @MarioG for the beautiful engine model! Without him this update would not have been possible.
GENERAL INFO
- Predecessor: Delta II 7925H
- Created On: Windows
- Game Version: 0.7.1.4
- Price: $7,643k
- Number of Parts: 366
- Dimensions: 49 m x 13 m x 7 m
PERFORMANCE
- Total Delta V: 3.9km/s
- Total Thrust: 3.9MN
- Engines: 14
- Wet Mass: 7.11E+5kg
- Dry Mass: 67,429kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|---|---|---|---|---|
| 1 | 3 | 230m/s | 1.1MN | 2.4m | 7.11E+5kg |
| 2 | 6 | 202m/s | 1.8MN | 75s | 7.11E+5kg |
| 4 | 3 | 367m/s | 872kN | 80s | 2.07E+5kg |
| 9 | 1 | 1.9km/s | 31kN | 5.5m | 7,423kg |
| 11 | 1 | 1.2km/s | 85kN | 40s | 3,655kg |
3 Comments
- Log in to leave a comment
-
45.5k MarioG+1 5.4 years ago
im sorry i couldnt shrink down the RS-27 ive been a bit busy and i have to run it through a script to shrink down everything
-
443 AscendingNike+1 5.4 years ago
@MarioG I finally wrapped up the Delta II updates!
One small thing to note: Since the plume is still bugged on your AJ-10, I decided to keep your structural models and just replace your engine nozzle with my old AJ-10 engine nozzle so that the plume will expand properly. Everything else is exactly the same from your engine!
@MarioG No need to apologize! I'm just thankful that you were able to contribute that AJ-10 model this time around. It adds so much to the aesthetic of that upper stage!
If you do get around to shrinking the RS-27, Ill integrate it and post an update. Ill probably wait for the plume on your AJ-10 to get fixed as well before posting, so no need to rush!