Orbiter-I (Improvements)

Orbiter-I is a 2-stage rocket capable of delivering payloads to Droo orbit. It currently houses the ReBound Multi-Purpose Satellite as it's payload. The rocket can be automatically controlled by a vizzy program but it doesn't do the part of choosing which orbit is the payload going to so after the automation, you can fully control the craft. Instructions are below after the changes.

Changes:

• Added a gravity turn into the VIZZY program

• Fairings now detach at 43500m/43.5km

• Renamed AG(Activate AG 4-9) to AG(Activate ReBound MPS) and now automatically extends/retracts the antennas

Instructions:

1. Open the AG panel and press AG(Launch) to launch the rocket. Wait until the 2nd stage separates from the 1st stage and proceed to the next step.

2. After the separation, time warp at 25x or below. Once you're near the apoapsis, the time warp will be set back to normal and the 2nd stage engine will initiate a burn to gain orbit. At the moment the engine ignites, you now have full control of the craft and if you don't want the 2nd stage anymore, you can simply undock/separate from it by pressing AG(Docking Port) on the AG panel but after that you need to use RCS with the analog sticks and translation mode enabled to distance the satellite from the 2nd stage since we're not using a interstage to link them together.

Here are the definitions for what each AG does:

Launch- Starts the vizzy program to launch the rocket and enables other functions.

Activate ReBound MPS- Activates all functions of the satellite. This can only be activated once the fairings detach.

Docking Port- Enables/Disables the docking port and is also used to separate from the 2nd stage.

Activate Antenna- Activates the antennas. Use Slider 1 to adjust.

Antenna Alignment 1- Turns the main antenna in two directions using Slider 2.

Antenna Alignment 2- Rotates the main antenna using Slider 3.

Beacon Lights- Turns Beacon Lights on/off.

Docking Lights- Turns Docking lights on/off.

Solar Panels- Expands/Keeps the solar panels.

RCS- Enables/Disables RCS.