ManBearPig

It's time to get cereal... Here's a fully reusable (except for the fairings) interplanetary space plane! The Lander has also a rover so you can drive on Luna or Cylero. It's of course inspired by the Skylon SSTO space plane project.

I suggest you use the manual commands from takeoff to ~20'000m. Take your time so you get faster and lighter.

Activate second stage at~900m/s and ~30'000m altitude with a 45° pitch.

Activate third stage as soon as you leave the atmosphere, both turbofans will break away and land on droo with parachutes.

Now focus, you'll have a bad time if you don't follow the next steps.

1. Activate AG1
2. Make sure the thrust is at 0% and activate 4th stage
3. Use thrust to move the lander away from the plane
4. Activate 5th stage
5. Now you can start your landing procedure but activate the 6th stage before touching the ground
6. Once landed, activate the 7th stage and put slider 2 at 100%
7. Then activate 8th stage, when the rover is on the ground and stable, unfold it by putting slider 1 at 100%
8. activate rover direction activation group (you can also use you solar panels
   to recharge battery)

and thats it! hope you'll enjoy this craft!