If you can make this rocket able to lift off and not explode, repost it, and send the link to me, because for THE LIFE OF ME, I JUST CANT GET IT TO WORK.
Pls help, joe.
(Suggested quality: low.)
GENERAL INFO
- Created On: iOS
- Game Version: 0.9.404.0
- Price: $-1,362,374k
- Number of Parts: 305
- Dimensions: 441 m x 42 m x 39 m
PERFORMANCE
- Total Delta V: 14.4km/s
- Total Thrust: 1,941.4MN
- Engines: 120
- Wet Mass: 1.1E+8kg
- Dry Mass: 4.02E+6kg
STAGES
Stage | Engines | Delta V | Thrust | Burn | Mass |
---|---|---|---|---|---|
1 | 78 | 2.3km/s | 1,384.0MN | 2.1m | 1.1E+8kg |
3 | 34 | 9.5km/s | 555.7MN | 3.6m | 3.43E+7kg |
4 | 4 | 2.6km/s | 1.6MN | 1.9m | 1.14E+5kg |
7 Comments
- Log in to leave a comment
-
1,962 Caleb001
@JoeTheRocketMan I have an idea though. If it is weight related, then you can change the fuel type in the second stage to Hydrolox, because it is only like 1/3 the weight of kerolox and metholox. You can also add boosters to the rocket, just as long as the side interstages are connected to the second stage not the first, but then the weight of the whole rocket is on those two tiny little interstages, you move the boosters around until the engines of the boosters and the engines of the core are all at the same height, so they are all resting on the ground. This distributes the weight of the second stage across the first interstage and the booster interstages (however many you choose, the more, the better), rather than just the first stage.
-
1,962 Caleb001
@JoeTheRocketMan right when I downloaded it, it looked like the second stage wasn’t connected to the first at all, so I messed around with it for a little bit, got rid of the extra interstages towards the bottom, and it stood on its own, but when I ignited , the second stage came way from the first, and flew on its own. I reloaded the game to see if I could replicate this, and the rocket immediately exploded. Nothing I did after that could stop it from rapid unplanned disassembly.
-
6,623 DMCcorp
@Caleb001 yes, I need help getting it to connect to the second stage, because it can’t support the weight or doesn’t hold it correctly?
-
-
6,623 DMCcorp
@Caleb001 yes, I need help getting it to connect to the second stage, because it can’t support the weight or doesn’t hold it correctly?
@Caleb001 I think the weight distribution might be off