0 downloads Unlisted

I've got a plane.

I've created a very simple thing; auto take-off.

I'm trying to "set pitch" of the craft to lift the nose.

In vizzy, the "help" instruction (the one displaying when selecing the "set pitch" on the left) tells me it's in degrees. However, when I try and enter "20" into the box, I'm getting an error; "the value must be between -1 and 1". That'd not be an issue if it was working - but it's not. 0.2 does nothing. It probably does require a degree.

So this maybe a case of an erroneous check on the input variable, unless I'm mistaken.

GENERAL INFO

CRAFTS

Name Location Part Count Mass Altitude Velocity
rocket v6.2 solar, no lander Tydos 6 1,833kg 6,500.8 Mm 934.0 m/s
rocket v6.2 solar, no lander-226 Cylero 6 1,835kg 3,747 km 656.0 m/s
rocket v6.2 solar, no lander, 13.4 dv Niobe 6 3,794kg 18 km 7.0 m/s
rocket v6.2 solar, lander, dv 8 Luna 6 5,091kg 11 km 741.0 m/s
rocket v6.2 solar, 13.4 dv Niobe 6 3,729kg Ground 0.0 m/s
rocket v6.2 solar, 13.4 dv-314 Droo 3 4,367kg 313 km 3.36 km/s
rocket v6.2 solar, 13.4 dv-315 Niobe 6 3,828kg 23 km 9.0 m/s

Upvotes Disabled

This post is unlisted and upvoting is disabled.