- In craft designer create new craft.
- Add structural panel on top of command disk.
- Go to Part Rotate Tool.
- Click on "<" or ">" buttons next to X axis repeatedly till the angle reaches 90 or -90 degrees.
- On the next click it will jump back to 75 degrees and Y/Z will change to 180. Repeated clicks will keep jumping back and forth between 75 and 90.
- Bonus points. After step 5 if you use arrow buttons to rotate along Y or Z axes you will see that both of them rotate part around one same axis.
GENERAL INFO
- Created On: Windows
- Game Version: 1.0.4.0
- Planetary System: Juno System
- Planets: 20
- Game Time: 11.0 days
CRAFTS
| Name | Location | Part Count | Mass | Altitude | Velocity |
|---|---|---|---|---|---|
| First Orbit Designer Tutorial | Droo | 4 | 106kg | 425 km | 2.95 km/s |
| OrSat | Droo | 4 | 606kg | 1,003 km | 2.64 km/s |
| LunarNova | Luna | 4 | 3,311kg | Ground | 0.0 m/s |
| LunarNova MK2 | Brigo | 7 | 1,120kg | 7,990 m | 562.0 m/s |
| LunaBus MK1-31 | Droo | 3 | 3,049kg | 48,868 km | 449.0 m/s |
| LunarDelivery MK1 | Luna | 13 | 4,373kg | Ground | 0.0 m/s |
| LunarDelivery MK1-39 | Droo | 18 | 5,780kg | 1,190 km | 2.28 km/s |
| LunarDelivery MK1-40 | Luna | 24 | 3,134kg | Ground | 0.0 m/s |
No Comments
Upvotes Disabled
This post is unlisted and upvoting is disabled.