2 downloads Unlisted
Auto Credit Based on LeMagicBaguette's Map view exists in skybox

Every so often, for whatever reason, the plume of a nozzle will not render properly. The large nozzle surrounded by the little active ones is also active, but fails to render as per the issue.
The problematic nozzle is the orange ring inside the docking port surrounded by the smaller downward plumes.

GENERAL INFO

CRAFTS

Name Location Part Count Mass Altitude Velocity
Trainer-19 Droo 27 7,610kg Ground 0.0 m/s
Chonk-25 Juno 2 7kg 13,473.5 Mm 25.98 km/s
Chonk-41 Droo 2 7kg Ground 0.0 m/s
Chonk-41-43-44 Droo 7 1,855kg Ground 0.0 m/s
Chonk-47 Droo 27 12,289kg Ground 0.0 m/s
Ivans Flying House II-64 Droo 2 2,695kg Ground 0.0 m/s
Ivans Flying House II-65 Droo 10 2,407kg Ground 0.0 m/s
Ivans Flying House II-71 Droo 13 1,866kg Ground 0.0 m/s
Ivans Flying House II-72 Droo 2 2,695kg Ground 0.0 m/s
Ivans Flying House II-73 Droo 10 2,407kg Ground 0.0 m/s
Dimas Errand Craft-75 Droo 1 200kg Ground 0.0 m/s
Ivans Flying House-79 Droo 13 129kg Ground 0.0 m/s
Ivans Flying House-81 Droo 31 2,511kg Ground 0.0 m/s
Ivans Flying House-83 Droo 2 2,784kg Ground 0.0 m/s
Ivans Flying House-84 Droo 11 2,499kg Ground 0.0 m/s
Dimas Errand Runner-88 Droo 1 200kg Ground 0.0 m/s
Dimas Errand Runner-89 Droo 1 200kg Ground 0.0 m/s
Blinoslav Pugachev-115 Droo 17 2,128kg Ground 0.0 m/s
Raymond Park Droo 1 0kg 4,806 m 719.0 m/s
Raymond Park Droo 1 0kg 504 km 19.80 km/s
The Cube Luna 39 5,847kg 16 km 515.0 m/s

Upvotes Disabled

This post is unlisted and upvoting is disabled.