Overview

This is the Bravo 10 v4 1.1, nothing has changed much. I changed the staging since, the Bravo 10 v4 didn’t have the proper staging. The changes that you will probably use are the cameras laid throughout the rocket, well that’s it for this now learn how to fly and land it.

Flight Plan

Preparing for Liftoff

Now as with all rocket launches, there has to be some preparation made. so the only thing that you will need to do is open Slider 2 and then tap AG 5 on the Activation Groups Tab. Then start your count, Liftoff.

Going to orbit

With the rocket getting higher and faster upwards, you also need to go really fast sideways that is how you get to orbit. Down below is the gravity turns at what height and what pitch you change them to:

1. 1.5 km = 75
2. 5 km = 65
3. 10 km = 55
4. 15 km = 45
5. 20 km = 35
6. 25 km = 25

Then continue until fuel percentage is 21% and then cut the engine and then separate the stages.

Second Stage

After MECO (Main Engine Cutoff) Just press the Prograde arrow and then just keep burning until your Apoapsis is about 225 km to 250 km in height. After that switch back to the first stage to land it.

Landing Successful

Preparing for landing

Now is it time for the first stage or booster to land. All you will need to do is press the Retrograde button, turn off RCS and then turn it back on again (also switch off the Landing Gear, but don't turn it on). Lastly just turn off all the engines, by turning them on again and then turn them off.

Re-entry Burn

At 60 km turn on the Center Engine (AG 4) and the two outer engines (AG3). Keep burning until you reach 10% in fuel. Next just let it fall to the ground.

Hover-Slam

Now at 10 km turn on the same three engines (AG 4 and AG 3), once you have slowed down enough and think that the single engine can make a soft touch down turn off the two outer engines (AG 3), but do not ever forget to unfold the Land Gear.

Second Stage

Delivering the Payload

Now that everything has taken care of, it's now time to deliver the payload to orbit. Start by pitching the second stage to 5* and then let the second stage burn until you have created an orbit for the payload.

Activation Groups and Sliders:

• AG 1 - Satellite Gear
• AG 2 - 6 Outer Engine Burn
• AG 3 - 2 Outer Engine Burn
• AG 4 - Centre Engine Burn
• AG 5 - All Fin Control
• AG 7 - Lights and Strobe Lights
• AG 8 - Landing Gear

• AG 10 - RCS

• Throttle Slider - Rocket Throttle

• Slider 1 - Fin Control
• Slider 2 - Fin Control

Contact Me!!!

If you want to give me some advice or any complaints about the E Series and B Series feel free to follow me on Twitter. Click the picture.

Do you also want to support me, then considering becoming one of my Patreons. You will get behind the scenes content, a private discord server, early access to my content and more if you click the link. Click the picture

Thanks,
hiam0620

Check my other rocket designs

(Click the pic to go to that rocket)

Bravo 10 v3

Bravo 10 v2 Semi-Autonomous

Echo 3

Please always feel free to let me know if there are any suggestions or problems with any of my rockets. -hiam0620