Autonmous
This is the Bravo 10 v2 Semi-Autonomous. I coded the rocket to fly by itself for the time of operation. Also, I have placed a heat shield at the bottom of the first stage.
How to fly it
To fly this rocket you need to wait. The fins will fold on the last second and the rocket will fly for the first 96 seconds. It will then separate the stages and it will then put the second stage on a sub-orbital orbit, that will give you enough time to land the first stage.
How to land the first stage
Landing Successful?
Flipping the Booster
Now that you have created a sub-orbital orbit. It is now time to land the booster. First thing you should do is to turn on everything (including the RCS and other turned on things on the Activation Groups Tab). Once you have done that, press the Retrograde Circle and then the rocket should do the flip maneuver.
Re-entry Burn
As you start to enter the atmosphere again the booster will start to experience heating damage so to reduce this reignite the 2 outer engines (AG3) and the center engine (AG4) to slow it down. Only do this once you have reached 60 km and then stop when your fuel percentage reaches 10% and then turn off the engines.
Landing GO!
Now that you have prepared everything, it’s now time to land the booster. To land it turn on the center engine (AG4) at 20 km and then turn on the 2 outer (AG3) at 16km and then turn off the 2 outer when you have slowed down enough and let the center engine to do the final landing burn. Then at 100 m deploy the landing gear and once you have done that you just did 75 percent of the mission.
Second Stage
Delivering the Payload
Now that everything has taken care of, it's now time to deliver the payload to orbit. Start by pitching the second stage to 45* and then let the second stage burn until you have created a orbit for the payload.
Activation Groups and Sliders:
- AG 1 - Satellite Gear
- AG 2 - 6 Outer Engine Burn
- AG 3 - 2 Outer Engine Burn
- AG 4 - Centre Engine Burn
- AG 5 - All Fin Control
- AG 6 - Fairing Separation
- AG 8 - Landing Gear
AG 10 - RCS
Throttle Slider - Rocket Throttle
- Slider 1 - Fin Control
- Slider 2 - Fin Control
Contact Me!!!
If you want to give me some advice or any complaints about the E Series and B Series feel free to follow me on Twitter. Here is the Twitter Page
Thanks,
hiam0620
Check my other rocket designs
Bravo 10 Semi-Autonomous
Bravo 10
Bravo 1 v9 1.1
Bravo 1 v9
Bravo 1 v8 1.1
GENERAL INFO
- Predecessor: Bravo 10 v2
- Created On: iOS
- Game Version: 0.9.506.0
- Price: $242,944k
- Number of Parts: 124
- Dimensions: 131 m x 12 m x 12 m
PERFORMANCE
- Total Delta V: 10.8km/s
- Total Thrust: 63.5MN
- Engines: 11
- Wet Mass: 2.51E+6kg
- Dry Mass: 1.77E+5kg
STAGES
Stage | Engines | Delta V | Thrust | Burn | Mass |
---|---|---|---|---|---|
1 | 9 | 3.4km/s | 54.0MN | 1.6m | 2.51E+6kg |
2 | 2 | 7.5km/s | 9.5MN | 2.7m | 5.66E+5kg |
4 Comments
- Log in to leave a comment
-
-
4,796 TweedleAerospace
@RocketScienceIncorporated would you like to join the IAAR? It stands for the International Association of Automatic Rockets! You qualify!
-
1,489 RocketScienceCo
Hi guys,
This is the Bravo 10 v2 Semi-Autonomous. I put the same instructions for the older model of this rocket as they almost function the same, but always feel free to contact me if any problems happens to the rocket.Thanks,
hiam0620
@RocketScienceIncorporated here. Just say hello or something. I will give you the password to the IAAR account once you are on!