@Pedro
I’m not sure what you guys did, but this update significantly improved the performance of SR2 on my 7yo iMac… I’m seeing FPS numbers I’ve not seen in a long time.
:’D
@QuantumEnterprises BTW, I'll be including instructions on how the rover deploy sequence works... It can be deployed in at least three ways... downward (or "Drop") like in the pics, upwards (or "Jump") using four solid rockets (they're hidden) and... i think another way, but I don't recall... I'm only using the "drop" and "jump" methods for this project.
I configured the rover in such a way it can easily be used in other crafts. I do plan to post separately just the rover with all deploy systems attached so anyone can easily add it to their own crafts.
The rover isn't mine, but I've never tweaked a craft as much as I did that rover. Every single one of the rover's 199 parts and deploy system I set "part collisions" to "never" and "collision response" to "none". The rover can be dropped from 10000m and hit the ground without damage. well, 90% of the time. occasionally part of the suspension will break, but not often.
but being dropped with a deploy system has been a much better and fun way to get the rover to the ground, especially since it's in sync with the ten Drudes.
🤪
@QuantumEnterprises
thanks for the suggestion! I figured that out a few versions ago... if you look at the last pic you can see a couple in free fall.. set it to explode to 0 at 15agl, but i specifically left just the chute to remain open even after it's detached to assist in locating the line of drudes. i've adjusted the drop sequence snd timing so the rover lands in the same line as the drudes. four drudes in front, rover, then six behind. The rover has a somewhat complex (but very cool-loooking) multi-stage deploy sequence that puts it on the surface long before the drudes land, so timing ended up being tweaked a bunch in order for everything lands in a group. :)
Will post soon... the weather here is about to go to hell with this hurricane coming so i'll have the time to finish it up more. My generator might be having to provide the necessary 1.21Gigwatts to get it posted tho.... 🤪
@DrexxVolv
Hmmmm..... like a mirrored wing within a wing...
Hmmmm.....
Hmmmm..... you gave me an idea that may help me with a flying wing I've been tinkering with for a while....
Hmmmm.....
@SmurfResearchX
Perfect solution, thanks! I've used it with great success. It's so very obvious now!
I do wish you could test assemblies like this in designer, tho...
@Hannah1212
@FalconAerospaceFAS
bwahahaha
Here's an hypothetical situation:
In the block house:
"RSO? What we're launching we don't need no RSO!"
...
Meanwhile, at the launch pad:
---Proton launched
---Proton immediately decides to head off course, almost as if someone installed a sensor upside down
---Proton begins it's uncontrolled "flight" and decent
---People who'd gathered to watch/film the launch all begin to poo themselves in unison, wondering if the Proton was going to head for them
---Proton finally hits the ground
---Proton goes kaBOOM!!!!
---People watching/filming launch all begin to hit the ground in their poo-filled pants as the shockwave approaches
---Shockwave and sound hits the several groups of people with poo-filled pants, causing a disgusting, nasty and sticky mess.
...
Meanwhile, back in the block house:
"See? Proof positive that an RSO is not needed. The ground does just as good of a job as an RSO... but for free."
I've said it before, and will say it again... Russians have balls of STEEL. And I can't help but admire them for that. 🤪
@AndrewGarrison
have the system requirements changed from .9.6.xx to .9.7.xx? None of the .9.7xx betas have run on my Mac... I just get a black screen where "Loading..." normally appears. downgrading back to .9.6xx gets things working again. My other Mac will run the betas, but it's slightly newer.
@Thesaturnaerospace
steam loads and works fine. I'm able to successfully launch other games via steam. I also confirmed my computer will run Unity 2020. I realize it could be a bug, but since it wasn't fixed in .703 who knows. thats why I want the devs to see. also on both computers I run SR2 on, Droo has turned into a white ball that looks like a white dwarf. It looks like this on both .161 and .701/.703, both in the main menu screen and in-game.
also, on the computer that is running the .703 beta Droo has become a water world, with the DSC sitting on a small island covered with dirt and just big enough to contain just the DSC. no other land in sight. I'll keep trying things and hope for the best. But I really would like to see Droo normal again instead of a white dwarf. Never even touched Planet Studio so I know I didn't screw it up.
@Tweedle_Aerospace When I opt into the public beta, SR2 will not load, it locks up at the black loading screen. it only does that on one of my computers. the other loads the latest public beta just fine. well, it has it's own issues that are not as big of a deal as the lockups.
while typing this I began to wonder if Unity 2020 is compatible with my older system specs. after googling, I found that my Mac does indeed meet the system requirements. I also tried installing the public beta once again (after a reboot) and it behaves the same... locks up at the "Loading..." screen. It's kinda frustrating. thank god it will downgrade...
@Tweedle_Aerospace When I opt into the public beta, SR2 will not load, it locks up at the black loading screen. it only does that on one of my computers. the other loads the latest public beta just fine. well, it has it's own issues that are not as big of a deal as the lockups.
Do you mean what the maximum power output of a Mr. Fusion system is or the power required to power the flux?
I'm not sure what the Mr. Fusion maxes out at, but it needed refueling after one flux event. So 1.84 GW might be close to the max rated output. I suppose the extra power could be stored then used to spin thousands of scroll wheels at peak spin times.
Wouldn't a "Mr. Fusion" take care of all 1.21GW? I mean, just a couple banana skins and half a Miller High-Life should be plenty of fuel for that much power.
@Spenzerointernational I've probably 6 or 7 planes, several of them are by ZeroAerospace. I've "U-Hauled" his tanker and am working on his space shuttle type craft. I'm thinking about putting some cargo doors on top... and it's fun to fly. two large huge cargo planes, and a few ground vehicles. i’ve got a starship transporter that can move a fully fueled Starship Cargo. it's a really cool (and heavy duty) truck that picks up, rotate from horizontal to vertical, open the "grabbers", drive forward a few feet, swap to the starship and fly it with its vizzy working normally. getting that to work was a chore. lots of crushed starships. I think I’ve found the sweet spot.
almost all craft are not mine. most I just painted and left alone but have done tweaks and changes on a couple. I’ve kept track of who created each craft to ensure they get credited.
I’ve even thought about posting this thing as a sandbox once i get those hangars full. heh
@Spenzerointernational cool! Glad you like. I have a literal hanger full of crafts (planes, rockets, and a couple ground vehicles) awaiting their new livery. I’m also updating crafts already in the fleet. One of the new fonts in the latest update is a much better match to the real “U-haul” lettering. And being the perfectionist that i am, I gotta update them or it’s gonna drive me (more) InSaNe than I already be! 🤪
I am truly impressed you’re making these planes on iOS... mind if I ask what iDevi you’re using? I use both my iPad Pro 9.7” (1st Gen) and a mid-2010 iMac for creation, mods, and vizzy. I was also using my 2013 15” retina MacBook Pro for testing and to use for the best quality photos and videos since it’s the one computer I own that has a dedicated GPU that lets me run SR2 in high quality mode. But it melted down on me a few days ago. Almost literally. It got WAY too hot (burned my finger, like left a mark on my finger) and when I yanked power it turned off itself immediately even tho the battery was “supposed” to be fully charged. After it cooled down I opened it up, cleaned out 7 years of dust, dog dirt, and dog hair that was clogging up the fans, air exhaust, and other spots. But I could clearly see the part that’s causing this (known) problem with the MagSafe-to-DC board. Already ordered the part from ifixit and hope to have it operational again in the next week. I also have to buy a new, unscorched power adapter too, and I’m not thrilled about that cuz they ain’t cheap. But the battery seems intact and no signs of overheating and it wasn’t puffed up. It could use a fresh battery but I’m not ready to tackle that job. Any iFitit kit that includes solvent to loosen the adhesive between the battery and case is gonna be rather involved.
Sorry for the novel... back to steam cleaning the seats in my bug eye... 😎
@Spenzerointernational Cool! Glad you like... I forget the name of this particular craft, but it's the one with the folding wings. I have it saved simply as "FoldJet". I'm sure you can see the line of them in the background with their wings folded up. It's a awesome jet! Your crafts are really cool with nice detail. Looking back at my history I see that you are the creator of the interior test plane with the 40 droonauts... Thats the one I used for dumping all 40 of them out as the plane started to break up... also a great flying jet.
@SmurfResearchX ding ding ding
the judges accept your answer!
Wait until you see the complete official "Smokey and the Bandit" play set. Snowman One is included (not pictured) along with three tanker trucks (or "kegs", if you will), each carrying 28,000kg of wonderful Coors (each "keg" have already been tapped at the rear for immediate, convenient deployment), six Bandit blocker jets, one Smokey micro jet, and... some other details I may add after watching the movie again. Some assembly required, batteries are pre-installed. For ages 6 - 50.
I've had a lot of fun (and plenty of frustration) to get things where they are today.
If you cant see the image in full size (for the little details), right-click on the image and open in new tab (or download linked file). you'll then be able to read all the smaller text what should help.
and google just might be your best friend for the answer. It's fun! 🤪
I started with the whole u-haul theme but that evolved into hauling a specific cargo and the wackiness that occurs for 93 minutes. It's from a very popular movie from 1977... Again, it's in the little details... 🤔
🤪
It was beautiful. I wanted them to stick the landing but they got A LOT further than I thought they’d get.
The belly flop was unbelievable. Basically a 15-story building falling sideways at terminal velocity until the last moment.
It was very beautiful.
Congrats, SpaceX. SN9 up next!!
I had something similar happen twice. The first time I deleted the app from my iPad and reinstalled it, I lost everything. When it happened again, I chose a different tactic: I plugged it into my Mac and browsed to the SR2 folder. Inside I renamed the "applicationstate.xml" file but didn't create a new one. I was going under the assumption SR2 would create a new, fresh applicationstate.xml file... which it did. I launched SR2, it booted up correctly and I hadn't lost a thing. The only reason I tried this method is because I performed the same procedure on my Mac when something went wrong at it stayed stuck at the black "Loading..." screen.
Perhaps this might help you out...
@Zyvx i'm making a time-lapse video off all the flights it took to the make that scene. The Marshall has its own special scene. It should be quite humorous.... :)
The jet is the DLJ-1 by @crazydl. I only changed the colors to be more similar to a real jet target drone.
Marshal Cyber Bike by @Zyvx
Simple vizzy created by me using lots of trial and error.
I have a sandbox with the pile... I may post it... dunno if anyone would be interested at all.
Dude, I feel ya. I have several projects that seem to have potential but I get frustrated trying to understand and automate stuff with Vizzy.
I've taken plenty of training classes on different program languages over the years but nothing actually stuck in my head.
This might date me quite bit, but the very first "real" programming class I took in college was... wait for it... FORTRAN. It was useless and outdated when I took the class almost 30 years ago (damn I'm old) and I obviously don't remember any of it.
About all I can do is write a program that spits out "Hello world!" in an endless loop. It's a simple but basic bit of coding I can do. (See what I did there?) I learned almost all of my original coding on my old C-64. It was pretty basic (d'oh! I did it again!).
Hello world!
Hello world!
Hello world!
Hello world!
Craft credits
@Rizkyman You never fail to impress. I really don’t think you need to put “I’m not a programmer” in your code. I’m pretty sure your Vizzy skills qualifies you as a programmer.
@KellyNyanbinary I use your auto-reuse v.1.1 rocket all the time and love it. Additionally, thank you very much for KAL 1.1.32 cuz I’d be lost, both literally and figuratively, without it.
@iSpace I’ve had a lot of fun with your craft including your Luna X Lander. I should post some pics of my manned version of it. Quite challenging to get the manned version of the lander to the surface safely. But I’ve gotten better at it. :)
Thanks to all y’all for creating some great crafts and great code. I’ve become quite familiar with your stuff which is one reason a lot of my screenshots feature your work.
Okay gang, now that the credits are over, let’s give this photo a great title. :D
I just had a 2nd Altair descend between the two boosters and land on the top of the other Altair on the ground. The two boosters are actually propping it up. I wish I had video of this one! I have screenshots but video? That would have been epic.
okay. Gonna make an assumption here. it sounds like it “Persons of a younger age” are more SP players whereas the SR2 crowd tends to be (another assumption) more mature, intelligent and engaged. That’s why I posed the question in the first place... I simply had not seen anything I’d call “drama”.
I know there are some incredible young creators here, I’ve been helped out by a couple of them recently. Pretty much everyone seems to been respectful to each other. Which is pretty cool. :)
@iSpace Your Infinity 7 booster is great! I've used it for several photos. Lands perfectly (almost) every time! I believe the Luna X moon mission is yours as well... I've had a lot of fun with it and it's little rover. Plenty of images I'll be sharing at some point. I'll tag you when I post more pics of iSpace craft. :D
@MSCSpaceworks I just might be able to do that! Gonna give it a shot... heh
Between screenshots of SR2 on my Mac (with all performance settings set to "high") and screen recordings on my iPad (medium-ish settings), I already have several years worth of screen captures of some sort just waiting to post! ;)
On a related note, I installed SR2 on my "higher-specs-than-my-iMac" MacBook Pro yesterday. Imagine my surprise when I discovered that there's cloud sync! It took forever to load on my laptop the first time... because it was syncing everything from my iMac... my crafts, my sandboxes, my vizzy programs, my custom launch locations, and, most importantly, the 300+ screenshots I've been taking on my iMac. Cloud sync is probably available for most games on Steam, but I only use Steam for SR2 and, of course, The Henry Stickmin Collection. :) Great technology that just works!™️
I have some shots of a transformers/robot stand off I set up before spawning and driving that awesome Rolls Royce onto the launch pad. In an effort to de-escalate the Stand-Off, I proceeded to do some donuts in-between the three robots. Check out my profile bio to see a preview photo of the robot vs. transformers. Fun fun fun!
A very sincere thank you for liking my "photos". I have fun composing my pics creatively for all to enjoy.
Don't forget to like, share, and subscribe. Thanks for watching and see you next.... wait, no, thats for my YouTube channel. heh
@Patelsh24 you did a great job! launching from both the runway and launch pad the SN5 would always head straight to the LP to land. Luck would take over from there... I did a lot of quick saves/restores before I got all four. Had fun doing it too. 😁
Oh yeah, I edited stuff to credit you for the programming.
@Pedro
+2 1.9 years agoI’m not sure what you guys did, but this update significantly improved the performance of SR2 on my 7yo iMac… I’m seeing FPS numbers I’ve not seen in a long time.
:’D
@QuantumEnterprises BTW, I'll be including instructions on how the rover deploy sequence works... It can be deployed in at least three ways... downward (or "Drop") like in the pics, upwards (or "Jump") using four solid rockets (they're hidden) and... i think another way, but I don't recall... I'm only using the "drop" and "jump" methods for this project.
+1 3.2 years agoI configured the rover in such a way it can easily be used in other crafts. I do plan to post separately just the rover with all deploy systems attached so anyone can easily add it to their own crafts.
The rover isn't mine, but I've never tweaked a craft as much as I did that rover. Every single one of the rover's 199 parts and deploy system I set "part collisions" to "never" and "collision response" to "none". The rover can be dropped from 10000m and hit the ground without damage. well, 90% of the time. occasionally part of the suspension will break, but not often.
but being dropped with a deploy system has been a much better and fun way to get the rover to the ground, especially since it's in sync with the ten Drudes.
🤪
@Staticalliam7 I think you'll find the final product a notch higher than LMAO.... it should be ROTFLMAO-worthy! hehehe
3.2 years ago@QuantumEnterprises
+1 3.2 years agothanks for the suggestion! I figured that out a few versions ago... if you look at the last pic you can see a couple in free fall.. set it to explode to 0 at 15agl, but i specifically left just the chute to remain open even after it's detached to assist in locating the line of drudes. i've adjusted the drop sequence snd timing so the rover lands in the same line as the drudes. four drudes in front, rover, then six behind. The rover has a somewhat complex (but very cool-loooking) multi-stage deploy sequence that puts it on the surface long before the drudes land, so timing ended up being tweaked a bunch in order for everything lands in a group. :)
Will post soon... the weather here is about to go to hell with this hurricane coming so i'll have the time to finish it up more. My generator might be having to provide the necessary 1.21Gigwatts to get it posted tho.... 🤪
@DrexxVolv
3.3 years agoHmmmm..... like a mirrored wing within a wing...
Hmmmm.....
Hmmmm..... you gave me an idea that may help me with a flying wing I've been tinkering with for a while....
Hmmmm.....
@SmurfResearchX
3.3 years agoPerfect solution, thanks! I've used it with great success. It's so very obvious now!
I do wish you could test assemblies like this in designer, tho...
@Hannah1212
@FalconAerospaceFAS
bwahahaha
Here's an hypothetical situation:
In the block house:
"RSO? What we're launching we don't need no RSO!"
...
Meanwhile, at the launch pad:
---Proton launched
---Proton immediately decides to head off course, almost as if someone installed a sensor upside down
---Proton begins it's uncontrolled "flight" and decent
---People who'd gathered to watch/film the launch all begin to poo themselves in unison, wondering if the Proton was going to head for them
---Proton finally hits the ground
---Proton goes kaBOOM!!!!
---People watching/filming launch all begin to hit the ground in their poo-filled pants as the shockwave approaches
---Shockwave and sound hits the several groups of people with poo-filled pants, causing a disgusting, nasty and sticky mess.
...
Meanwhile, back in the block house:
"See? Proof positive that an RSO is not needed. The ground does just as good of a job as an RSO... but for free."
I've said it before, and will say it again... Russians have balls of STEEL. And I can't help but admire them for that. 🤪
3.5 years ago@StarbornCelestial1
3.5 years ago😎
@AndrewGarrison
3.6 years agohave the system requirements changed from .9.6.xx to .9.7.xx? None of the .9.7xx betas have run on my Mac... I just get a black screen where "Loading..." normally appears. downgrading back to .9.6xx gets things working again. My other Mac will run the betas, but it's slightly newer.
@Thesaturnaerospace
3.6 years agosteam loads and works fine. I'm able to successfully launch other games via steam. I also confirmed my computer will run Unity 2020. I realize it could be a bug, but since it wasn't fixed in .703 who knows. thats why I want the devs to see. also on both computers I run SR2 on, Droo has turned into a white ball that looks like a white dwarf. It looks like this on both .161 and .701/.703, both in the main menu screen and in-game.
also, on the computer that is running the .703 beta Droo has become a water world, with the DSC sitting on a small island covered with dirt and just big enough to contain just the DSC. no other land in sight. I'll keep trying things and hope for the best. But I really would like to see Droo normal again instead of a white dwarf. Never even touched Planet Studio so I know I didn't screw it up.
@Tweedle_Aerospace When I opt into the public beta, SR2 will not load, it locks up at the black loading screen. it only does that on one of my computers. the other loads the latest public beta just fine. well, it has it's own issues that are not as big of a deal as the lockups.
3.6 years agowhile typing this I began to wonder if Unity 2020 is compatible with my older system specs. after googling, I found that my Mac does indeed meet the system requirements. I also tried installing the public beta once again (after a reboot) and it behaves the same... locks up at the "Loading..." screen. It's kinda frustrating. thank god it will downgrade...
@Tweedle_Aerospace When I opt into the public beta, SR2 will not load, it locks up at the black loading screen. it only does that on one of my computers. the other loads the latest public beta just fine. well, it has it's own issues that are not as big of a deal as the lockups.
3.6 years ago@MirazAerospace
3.6 years agoWhat version of windows are you running? Windows Vista or Win7? ;)
Do you mean what the maximum power output of a Mr. Fusion system is or the power required to power the flux?
3.6 years agoI'm not sure what the Mr. Fusion maxes out at, but it needed refueling after one flux event. So 1.84 GW might be close to the max rated output. I suppose the extra power could be stored then used to spin thousands of scroll wheels at peak spin times.
Wouldn't a "Mr. Fusion" take care of all 1.21GW? I mean, just a couple banana skins and half a Miller High-Life should be plenty of fuel for that much power.
3.6 years ago@Spenzerointernational I've probably 6 or 7 planes, several of them are by ZeroAerospace. I've "U-Hauled" his tanker and am working on his space shuttle type craft. I'm thinking about putting some cargo doors on top... and it's fun to fly. two large huge cargo planes, and a few ground vehicles. i’ve got a starship transporter that can move a fully fueled Starship Cargo. it's a really cool (and heavy duty) truck that picks up, rotate from horizontal to vertical, open the "grabbers", drive forward a few feet, swap to the starship and fly it with its vizzy working normally. getting that to work was a chore. lots of crushed starships. I think I’ve found the sweet spot.
almost all craft are not mine. most I just painted and left alone but have done tweaks and changes on a couple. I’ve kept track of who created each craft to ensure they get credited.
I’ve even thought about posting this thing as a sandbox once i get those hangars full. heh
3.7 years ago@Spenzerointernational cool! Glad you like. I have a literal hanger full of crafts (planes, rockets, and a couple ground vehicles) awaiting their new livery. I’m also updating crafts already in the fleet. One of the new fonts in the latest update is a much better match to the real “U-haul” lettering. And being the perfectionist that i am, I gotta update them or it’s gonna drive me (more) InSaNe than I already be! 🤪
+1 3.7 years agoI am truly impressed you’re making these planes on iOS... mind if I ask what iDevi you’re using? I use both my iPad Pro 9.7” (1st Gen) and a mid-2010 iMac for creation, mods, and vizzy. I was also using my 2013 15” retina MacBook Pro for testing and to use for the best quality photos and videos since it’s the one computer I own that has a dedicated GPU that lets me run SR2 in high quality mode. But it melted down on me a few days ago. Almost literally. It got WAY too hot (burned my finger, like left a mark on my finger) and when I yanked power it turned off itself immediately even tho the battery was “supposed” to be fully charged. After it cooled down I opened it up, cleaned out 7 years of dust, dog dirt, and dog hair that was clogging up the fans, air exhaust, and other spots. But I could clearly see the part that’s causing this (known) problem with the MagSafe-to-DC board. Already ordered the part from ifixit and hope to have it operational again in the next week. I also have to buy a new, unscorched power adapter too, and I’m not thrilled about that cuz they ain’t cheap. But the battery seems intact and no signs of overheating and it wasn’t puffed up. It could use a fresh battery but I’m not ready to tackle that job. Any iFitit kit that includes solvent to loosen the adhesive between the battery and case is gonna be rather involved.
Sorry for the novel... back to steam cleaning the seats in my bug eye... 😎
@Spenzerointernational
3.7 years agoSo, what do ya think? 🤪
@Rizkyman sorry... imgur can be pain to deal with. try this direct link
3.7 years agohttps://i.imgur.com/812T2wi.jpg
@Rizkyman
3.7 years agoThanks, dude.
The Infinite 7 has been a great launch vehicle, and It'll be missed.
3.8 years agosniff
🤪
@Spenzerointernational Cool! Glad you like... I forget the name of this particular craft, but it's the one with the folding wings. I have it saved simply as "FoldJet". I'm sure you can see the line of them in the background with their wings folded up. It's a awesome jet! Your crafts are really cool with nice detail. Looking back at my history I see that you are the creator of the interior test plane with the 40 droonauts... Thats the one I used for dumping all 40 of them out as the plane started to break up... also a great flying jet.
3.8 years ago@SmurfResearchX ding ding ding
3.8 years agothe judges accept your answer!
Wait until you see the complete official "Smokey and the Bandit" play set. Snowman One is included (not pictured) along with three tanker trucks (or "kegs", if you will), each carrying 28,000kg of wonderful Coors (each "keg" have already been tapped at the rear for immediate, convenient deployment), six Bandit blocker jets, one Smokey micro jet, and... some other details I may add after watching the movie again. Some assembly required, batteries are pre-installed. For ages 6 - 50.
I've had a lot of fun (and plenty of frustration) to get things where they are today.
If you cant see the image in full size (for the little details), right-click on the image and open in new tab (or download linked file). you'll then be able to read all the smaller text what should help.
3.8 years agoand google just might be your best friend for the answer. It's fun! 🤪
I started with the whole u-haul theme but that evolved into hauling a specific cargo and the wackiness that occurs for 93 minutes. It's from a very popular movie from 1977... Again, it's in the little details... 🤔
3.8 years ago🤪
It was beautiful. I wanted them to stick the landing but they got A LOT further than I thought they’d get.
4.0 years agoThe belly flop was unbelievable. Basically a 15-story building falling sideways at terminal velocity until the last moment.
It was very beautiful.
Congrats, SpaceX. SN9 up next!!
I had something similar happen twice. The first time I deleted the app from my iPad and reinstalled it, I lost everything. When it happened again, I chose a different tactic: I plugged it into my Mac and browsed to the SR2 folder. Inside I renamed the "applicationstate.xml" file but didn't create a new one. I was going under the assumption SR2 would create a new, fresh applicationstate.xml file... which it did. I launched SR2, it booted up correctly and I hadn't lost a thing. The only reason I tried this method is because I performed the same procedure on my Mac when something went wrong at it stayed stuck at the black "Loading..." screen.
+1 4.0 years agoPerhaps this might help you out...
@Zyvx i'm making a time-lapse video off all the flights it took to the make that scene. The Marshall has its own special scene. It should be quite humorous.... :)
4.0 years agoThe jet is the DLJ-1 by @crazydl. I only changed the colors to be more similar to a real jet target drone.
4.0 years agoMarshal Cyber Bike by @Zyvx
Simple vizzy created by me using lots of trial and error.
I have a sandbox with the pile... I may post it... dunno if anyone would be interested at all.
it looks like some sort of large, flying mothership craft who just dropped a small, flying baby craft. ;)
4.0 years agolooks pretty amazing!!
Bike by @Zyvx.
4.0 years ago"Control tower" by @MclovinSpace
4.0 years ago@Chtite451SR2 I am editing a video of this right now! it'll be worth the watch. I keep laughing while I'm putting these clips together.. heh
even with the background sound.... my roof was being replaced when I recorded it.
4.1 years agoMX1 by @ZAD
4.1 years agoI can't find who the tomahawk belongs to. But it's awesome. I launched the tomahawk from 42km away and it stayed locked on the whole way.
Dude, I feel ya. I have several projects that seem to have potential but I get frustrated trying to understand and automate stuff with Vizzy.
+1 4.1 years agoI've taken plenty of training classes on different program languages over the years but nothing actually stuck in my head.
This might date me quite bit, but the very first "real" programming class I took in college was... wait for it...
FORTRAN. It was useless and outdated when I took the class almost 30 years ago (damn I'm old) and I obviously don't remember any of it.
About all I can do is write a program that spits out "Hello world!" in an endless loop. It's a simple but basic bit of coding I can do. (See what I did there?) I learned almost all of my original coding on my old C-64. It was pretty basic (d'oh! I did it again!).
Hello world!
Hello world!
Hello world!
Hello world!
Craft brought to you by @Ronrob61
4.1 years ago@Rizkyman Moved it to Imgur. Hope that fixes it!
4.1 years ago@Rizkyman yikes
4.1 years agoI linked to files on my hosted site. Imgur can be a pain.
:/ I'll update it...
Craft credits
@Rizkyman You never fail to impress. I really don’t think you need to put “I’m not a programmer” in your code. I’m pretty sure your Vizzy skills qualifies you as a programmer.
@KellyNyanbinary I use your auto-reuse v.1.1 rocket all the time and love it. Additionally, thank you very much for KAL 1.1.32 cuz I’d be lost, both literally and figuratively, without it.
@iSpace I’ve had a lot of fun with your craft including your Luna X Lander. I should post some pics of my manned version of it. Quite challenging to get the manned version of the lander to the surface safely. But I’ve gotten better at it. :)
Thanks to all y’all for creating some great crafts and great code. I’ve become quite familiar with your stuff which is one reason a lot of my screenshots feature your work.
Okay gang, now that the credits are over, let’s give this photo a great title. :D
4.1 years ago@Astro1234 Sure thing. I thought you might enjoy seeing them. :)
4.1 years agoCraft by @Astro1234
4.1 years ago@s5ehfr9 YES! I am very much looking forward to v2 of your auto-turret, the “Auto-Turret XR™️“.
4.1 years ago<evil grin>
Bwahahahahahahaha!
</evil grin>
I just had a 2nd Altair descend between the two boosters and land on the top of the other Altair on the ground. The two boosters are actually propping it up. I wish I had video of this one! I have screenshots but video? That would have been epic.
4.1 years agoCraft credits:
4.1 years agoAltair Alphard created by @Rizkyman
Kell Cargo Rocket by @KellyNyanbinary
I'd crack open a beer but I wouldn't be able to drink it without dying from decompression.
4.1 years ago@KnightOfRen yeah, his post really sums up what the environment is like there.
4.1 years agoIt's caustic.
okay. Gonna make an assumption here. it sounds like it “Persons of a younger age” are more SP players whereas the SR2 crowd tends to be (another assumption) more mature, intelligent and engaged. That’s why I posed the question in the first place... I simply had not seen anything I’d call “drama”.
4.1 years agoI know there are some incredible young creators here, I’ve been helped out by a couple of them recently. Pretty much everyone seems to been respectful to each other. Which is pretty cool. :)
@iSpace Your Infinity 7 booster is great! I've used it for several photos. Lands perfectly (almost) every time! I believe the Luna X moon mission is yours as well... I've had a lot of fun with it and it's little rover. Plenty of images I'll be sharing at some point. I'll tag you when I post more pics of iSpace craft. :D
4.1 years ago@MSCSpaceworks I just might be able to do that! Gonna give it a shot... heh
+1 4.1 years agoBetween screenshots of SR2 on my Mac (with all performance settings set to "high") and screen recordings on my iPad (medium-ish settings), I already have several years worth of screen captures of some sort just waiting to post! ;)
On a related note, I installed SR2 on my "higher-specs-than-my-iMac" MacBook Pro yesterday. Imagine my surprise when I discovered that there's cloud sync! It took forever to load on my laptop the first time... because it was syncing everything from my iMac... my crafts, my sandboxes, my vizzy programs, my custom launch locations, and, most importantly, the 300+ screenshots I've been taking on my iMac. Cloud sync is probably available for most games on Steam, but I only use Steam for SR2 and, of course, The Henry Stickmin Collection. :) Great technology that just works!™️
I have some shots of a transformers/robot stand off I set up before spawning and driving that awesome Rolls Royce onto the launch pad. In an effort to de-escalate the Stand-Off, I proceeded to do some donuts in-between the three robots. Check out my profile bio to see a preview photo of the robot vs. transformers. Fun fun fun!
A very sincere thank you for liking my "photos". I have fun composing my pics creatively for all to enjoy.
Don't forget to like, share, and subscribe. Thanks for watching and see you next.... wait, no, thats for my YouTube channel. heh
@Patelsh24 you did a great job! launching from both the runway and launch pad the SN5 would always head straight to the LP to land. Luck would take over from there... I did a lot of quick saves/restores before I got all four. Had fun doing it too. 😁
Oh yeah, I edited stuff to credit you for the programming.
4.1 years ago